Installing the mounting bracket, Installing the mounting bracket -2 – Motorola VC5090 User Manual
Page 30
Advertising
2 - 2
VC5090 Vehicle Computer Product Reference Guide
Installing the Mounting Bracket
Figure 2-1
Mounting Bracket Installation
1.
Position the friction pads in the friction pad mounting area.
2.
Position the mounting bracket over the mounting holes.
3.
Place washers onto cap screws.
4.
Screw cap screws into mounting holes and tighten. Torque the cap screws to 276 ± 8.7 kgf/cm (239.6 ±
7.6 in-lbs).
CAUTION
It is required to use the Motorola provided mounting bracket.
Mounting Bracket
Flat Washer
Lock Washer
Friction Pad
Cap Screw
Friction Pad Mounting
Area
Advertising