Installing a secure digital card, Installing a secure digital card -34 – Motorola VC5090 User Manual
Page 62
Advertising
2 - 34 VC5090 Vehicle Computer Product Reference Guide
Installing a Secure Digital Card
A Secure Digital (SD) card provides secondary non-volatile storage. The card holder is located on the back of the
VC5090.
To install the SD card:
1.
Place the Main Power switch on the top of the vehicle computer to the off position.
2.
Remove and discard the eight screws securing the UPS/Memory Card door.
Figure 2-49
UPS/Memory Card Door Removal
3.
Lift the SD card retaining door.
Figure 2-50
Lift Retaining Door
4.
Position the SD card, with the contacts down, into the card holder. The SD card corner notch fits into the holder
only one way.
Retaining Clip
Advertising