Minicom Advanced Systems 5UM20114 - Manual (Page 30)

SMART CAT5 SWITCH 16 IP
.
29
Custom Video Modes
Add video modes to Smart 16 IP, which are not recognized using the factory
settings, when for example using special model lines in an X-Window
configuration on the host or with uncommon hosts or operating systems.
Click Add Custom Video Modes. The Custom Video Modes window appears see
Figure 20.
Note! This option may affect the correct video transmission and is for advanced
users only.
The maximum number of custom video resolutions is 4.
Figure 20 Custom Video Modes window
Custom Modes Handling – switch custom modes off, or use in addition to the
standard video resolutions, or use exclusively - Only. With Only you can force a
special video mode for Smart 16 IP.
To change the parameters for a mode, choose the number and press Update.
X Resolution - Visible number of horizontal pixels.
Y Resolution - Visible number of vertical pixels.
Horizontal Frequency (Hz) - Horizontal (line) frequency.
Vertical Frequency (Hz) - The vertical (refresh) frequency.
Total horizontal pixels - The total amount of pixels per line, including non-
visible and blank areas.