Minicom Advanced Systems 5UM20114 - Manual (Page 60)

SMART CAT5 SWITCH 16 IP
.
59
• Set and modify all Passwords and security profiles
• Fully access any computer
• Use all OSD functions
Supervisor (Status S)
The Supervisor can:
• Fully access any computer
• Access the following OSD functions only –F4 Scan, F5 Tune and F6
Moving the Confirmation label.
User (Status U)
There are 6 different Users in the Smart 16 IP system. Each User has a Profile set
by the Administrator that defines the access level to different computers. There
are 3 different access levels, these are explained on page 63.
Activating password protection
By default OSD access is not password protected. Only the Administrator can
password-protect the OSD or disable password protection.
To do so:
1. In the General settings window navigate to the Security line.
2. Press the Space bar to toggle between Security On and Off. The password box
appears.
3. Type the Administrator’s password (default is “admin”).
4. Press Enter. The new security status is set.
Changing the OSD hotkey
By pressing Shift, Shift the OSD appears. You can replace Shift, Shift with any
of the following:
• Ctrl, Ctrl
• Ctrl, F11
• Print Screen
To change the hotkey:
1. Navigate to the Hotkey line.