Microsoft PRO 906EX - Manual (Page 116)

Tray Paper Settings
108
3
❖ Designation Sheet 1 - 9
You can specify and display the paper tray to set designation sheets. You can
also specify the display time and copying method for two sided copying.
• Display Time
You can select [At Mode Selected] or [Full Time].
• Copying Method in Duplex
You can select [2 Sided Copy] or [1 Sided Copy].
Copy Method in Duplex is enabled only when you select [At Mode Select-
ed]
in Display Time.
❖ Front Cover
You can specify and display the paper tray to set front cover sheets. You can
also specify the display time and copying method for two sided copying.
• Display Time
You can select [At Mode Selected] or [Full Time].
• Copying Method in Duplex
You can select [2 Sided Copy] or [1 Sided Copy].
Copy Method in Duplex is enabled only when you select [At Mode Select-
ed]
in Display Time.
❖ Back Cover
You can specify and display the paper tray to set back cover sheets. You can
also specify the display time and copying method for two sided copying.
• Display Time
You can select [At Mode Selected] or [Full Time].
• Copying Method in Duplex
You can select [2 Sided Copy] or [1 Sided Copy].
Copy Method in Duplex is enabled only when you select [At Mode Select-
ed]
in Display Time.
❖ Slip Sheets
You can specify and display the paper tray in which to set slip sheets. You
can also specify the display time.
• Display Time
You can select [At Mode Selected] or [Full Time].
❖ Separation Sheets
You can specify and display the paper tray in which to set slip sheets. You
can also specify the display time.
• Display Time
You can select [At Mode Selected] or [Full Time].
❖ Interposer Upper - Lower
You can sets the display to show the type of paper loaded in each of the trays.
This information is used by the print function to automatically select the pa-
per tray.