Ieee 1394 (ipv4 over 1394) – Microsoft PRO 906EX User Manual
Page 27
Network Settings
19
1
Note
❒ As to [Effective Protocol], check if the protocol to use is set as [Active].
❒ [LAN Type] is displayed when optional wireless LAN interface board is in-
stalled. If both ethernet and wireless LAN (IEEE 802.11b) are connected, the
selected interface takes precedence.
❒ When setting [POP before SMTP] to [On], also make setting for[Reception Proto-
col]
and [POP3/IMAP4 Settings].
❒ When setting [POP before SMTP] to [On], check [POP3] port number in [E-mail
Communication Port]
.
Reference
p.52 “Interface Settings”
p.62 “File Transfer”
IEEE 1394 (IPv4 over 1394)
This section describes necessary set items for sending e-mail with IEEE 1394 in-
terface cable.
For details about specifying the settings, see "Interface Settings" and "File Transfer".
File Transfer
Scanner Resend Interval Time
As required
File Transfer
Number of Scanner Resends
As required
Heading
Setting Item
Setting Requirements
interface settings/IEEE 1394 IPv4 Address
Mandatory
interface settings/IEEE 1394 DDNS Configuration
As required
interface settings/IEEE 1394 Host Name
As required
interface settings/IEEE 1394 Domain Name
As required
interface settings/IEEE 1394 WINS Configuration
As required
interface settings/IEEE 1394 IPv4 over 1394
Mandatory
interface settings/Network
IPv4 Gateway Address
Mandatory
interface settings/Network
DNS Configuration
As required
interface settings/Network
Effective Protocol
Mandatory
File Transfer
SMTP Server
Mandatory
File Transfer
SMTP Authentication
As required
File Transfer
POP before SMTP
As required
File Transfer
Reception Protocol
As required
File Transfer
POP3/IMAP4 Settings
As required
File Transfer
Administrator's E-mail Address
As required
File Transfer
E-mail Communication Port
As required
Heading
Setting Item
Setting Requirements