Maytag MAF 9801 - Manual (Page 16)

16
Hold down the
Menu
button for three se-
conds. Within 15 seconds of releasing the but-
ton, you must index forward with the
Menu
but-
ton to the new desired setting. Make any alte-
rations with
and then press
Enter
.
In order to make an alteration, however, the
part of the programme that you wish to alter
must not have been activated yet.
- Temperature – can be altered before the main
wash has started.
- Spin speed – can be altered before the water is
pumped out after the main wash.
- Super rinse – can be changed before pumping
out the water after the main wash.
- E2 – can be changed before the main wash has
started.
- Anti-crease – can be changed for the final spin.
PROGRAMME COMPLETED
The text on the lower edge of the
display indicates that the programme is
completed.
Press the button, and a key will ap-
pear on the bottom edge of the display. The
door will open after three seconds.
WHEN WASHING IS FINISHED
Turn off the main power switch .
Close the washer door to prevent small
children from crawling into the machine.
88
99