Intelligent Motion Systems MFM Motion Detector - Manual (Page 4)

ORDER INFORMATION
OPTIONS
Remote Encoder
For optional closed loop control, Motion Control MForce
PowerDrives are available with differential encoder inputs
for use with a remote encoder (not supplied).
Motors and Encoders
IMS offers a wide range of motors, encoders and accessories
recommended for interface with the Motion Control MForce
PowerDrive. For complete specifi cations on these products,
please visit the IMS web site at www.imshome.com.
Power Supplies
IMS recommends the following power supplies for operat-
ing the MForce PowerDrive: IP804, IP806, ISP300-7. For
complete power supply specifi cations, visit the IMS web site
at www.imshome.com.
ACCESSORIES
Communications Converter Cable and Adapter
With an in-line RS-422 converter, this optional 12.0' (3.6m)
cable and adapter, MD-CC400-000 and MD-ADP-H, facilitate
the parameter setting of a single Motion Control MForce Pow-
erDrive from its P2 connector to a PC's USB port with plug-
gable mating connectors. Recommended with fi rst order.
Prototype Development Cables
To speed prototyping, 10.0' (3.0m) development cables are
available with pluggable locking wire crimp mates to:
I/O: 14-pin Connector ....................... PD14-2334-FL3
I/O: 20-pin Remote Encoder Connector .... PD20-3400-FL3
Power: 2-pin Connector ..................... PD02-3400-FL3
Comm: 10-pin Connector ................... PD10-1434-FL3
Motor Interface: 4-pin Connector ........... PD04-MF34-FL3
Accessories details at: www.imshome.com/cables_cordsets.html
MForce PowerDrive
–
MOTION CONTROL
MFI3C 34N7 – EE
P1: I/O
14-Pin Locking Wire Crimp
(20-Pin with Remote Encoder)
P2: Communications
RL = RS-422/485 with 10-Pin Friction Lock Wire Crimp
CB = CANopen with DB9 Connector
OPTION
P3: Power
2-Pin Locking Wire Crimp
P4: Motor Interface
4-Pin Locking Wire Crimp
TM FORCE
POWER DRIVE
MOTION CONTROL Remote Encoder Interface
For Closed Loop Control
(Encoder Not Supplied)
Example: Part Number MFI3CRL34N7 is a Motion Control MForce PowerDrive
with 14-pin I/O interface, 2-pin power interface, RS-422/485 communications with
10-pin friction lock wire crimp connector and 4-pin motor interface.
Option: Include -EE to part number for optional interface to remote encoder (not supplied).
TECHNICAL SUPPORT (U.S.A.)
Phone:
860/295-6102
Fax: 860/295-6107
E-mail: [email protected]
IMS ASIA PACIFIC OFFICE
30 Raffl es Pl., 23-00 Caltex House
Singapore
048622
Phone: +65/6233/6846
Fax: +65/6233/5044
E-mail: [email protected]
IMS EUROPEAN SALES MGT.
4 Quai Des Etroits
69005 Lyon, France
Phone: +33/4 7256 5113
Fax: +33/4 7838 1537
E-mail:
[email protected]
IMS UK Ltd.
25 Barnes Wallis Road
Segensworth
East
Fareham, Hampshire PO15 5TT
Phone: +44/0 1489-889825
Fax: +44/0 1489-889857
E-mail:
[email protected]
intelligent motion systems, INC.
Excellence in Motion
www.imshome.com
© Intelligent Motion Systems, Inc. All Rights Reserved. REV052307
IMS Product Disclaimer and most recent product information at www.imshome.com.
U.S.A. SALES OFFICES
Eastern Region
Phone:
973/661-1270
Fax: 973/661-1275
E-mail: [email protected]
Central Region
Phone:
260/402-6016
Fax: 419/858-0375
E-mail: [email protected]
Western Region
Phone:
602/578-7201
E-mail: [email protected]
370 N. Main St., P.O. Box 457
Marlborough, CT 06447 U.S.A.
Phone: 860/295-6102
Fax: 860/295-6107
E-mail: [email protected]
DISTRIBUTED BY: