6 fifo control register (fcr), Figure 19. fifo control register (fcr), Fifo control register (fcr) – Intel 537EX User Manual
Page 98: Intel confidential
![background image](/manuals/129095/98/background.png)
98
536EX Chipset Developer’s Manual
Intel Confidential
Parallel Host Interface 16C450/16C550A UART
9.2.6
FIFO Control Register (FCR)
This write-only register is used to enable the receiver and transmitter FIFOs, clear the FIFOs, set
the RCVR FIFO trigger level, and select the DMA signaling type.
Bit 4
EPS (Even Parity Select)—When even parity select (LCR4) and parity enable (LCR3) are set to ‘1’, an even
number of logic 1’s are transmitted or checked. When even parity select (LCR4) is a ‘0’ and parity enable
(LCR3) is a ‘1’, an odd number of logic 1’s are transmitted or checked.
Bit 3
PEN (Parity Enable)—When this bit is set to ‘1’, a parity bit is generated (transmitted data) or checked
(receive data) between the last data character word bit and stop bit of the serial data.
NOTE: The parity bit is used to produce an even or odd number of 1’s when the data word bits and the parity
bits are summed.
Bit 2
Number of Stop Bits (STB)—This bit specifies the number of stop bits transmitted and received in each serial
character. When STB is set to ‘0’, one stop bit is generated for each transmitted data character. When STB is
set to ‘1’ and the word length (WLS1 and WLS0) is equal to 6, 7, or 8 bits, then two stop bits are generated for
each transmitted data character. When STB is set to ‘1’ and the word length (WLS1 and WLS0) is equal to 5
bits, then one and a half stop bits are generated for each transmitted data character. The receiver only checks
for the first stop bit, regardless of the number of stops bits transmitted.
Bits 1:0
Word Length Select Bits (WLS1 and WLS0)—These two bits specify the data character word length of the
transmitted and received data. The supported word lengths are provided below.
Figure 19. FIFO Control Register (FCR)
Bit 1
Bit 0
Word Length
0
0
5 bits
0
1
6 bits
1
0
7 bits
1
1
8 bits
RCVR Trig. RCVR Trig. Reserved
Reserved
DMA
XFIFOR
RFIFOR
FIFOE
(write-only)
Register 2
Bits 7:6
MSB and LSB (RCVR Trigger Bits)—FCR bits 7 and 6 are used to set the trigger level for the RCVR FIFO interrupt.
Bits 5:3
Reserved—Bits 5, 4, and 3 are reserved for future enhancements.
Bit 2
XFIFOR (XMIT FIFO Reset)—When set to ‘1’, this bit clears all the bytes in the XMIT FIFO and resets the internal
counter logic to ‘0’. The internal shift register is not cleared by the XFIFOR bit. This bit is automatically cleared by the
modem.
Bit 1
RFIFOR (RCVR FIFO Reset)—When set to ‘1’, this bit clears all the bytes in the RCVR FIFO and resets the internal
counter logic to ‘0’. The internal shift register is not cleared by the RFIFOR bit. This bit is automatically cleared by the
modem.
Bit 0
FIFOE (FIFO Enable)—This bit when set to ‘1’, enables both the XMIT and RCVR FIFOs. This bit must be a ‘1’
whenever writing to any other FIFO bit. If FIFO is not set to ‘1’, then the DTE can not program any of the FIFO
functions.
Bit 7
Bit 6
RCVR FIFO
Trigger Level (Bytes)
0
0
01
0
1
04
1
0
08
1
1
14
- 41210
- 8xC251TQ
- ENTERPRISE PRINTING SYSTEM (EPS) 4127
- U3-1L
- 80960HA
- X58
- ESM-2850 2047285001R
- ATOM US15W
- D915GVWB
- XP-P5CM-GL
- AX965Q
- CORETM 2 DUO MOBILE 320028-001
- CV700A
- 80C188EA
- X25-M
- XP-P5IM800GV
- IB868
- D865GVHZ
- IB865
- Altera P0424-ND
- 8086-2
- IXDP465
- IWILL P4D
- GA-8I955X PRO
- FSB400 (PC2100)
- D845GLAD
- NAR-3041
- 87C196CA
- G52-M6734XD
- A96134-002
- Express Routers 9000
- 82540EP
- D865GLC
- IB850
- MB898RF
- Arima LH500
- V09
- I/O Processor
- M600
- SE7520JR2
- SERVER BOARD S5520HCT
- Extensible Firmware Interface
- GA-8IPXDR-E
- D845EBG2
- AW8D
- 80C186XL
- 21555
- 815
- 8S651M-RZ-C
- 5400 Series
- MB899
- G41 EXPRESS CHIPSET PMG41-D2
- IQ80219
- GA-8I945P-G
- CUSL2K
- D845HV
- 80C51FA
- 6300ESB ICH
- DESKTOP BOARD D925XBC
- 32882
- ATC6430M
- GA-EQ45M-S2
- MD566X
- GA-8I865GVMK-775
- Socket 478 AIMB-744
- 82543GC
- LGA775 MB865
- 8 LAN
- DBPXA210
- ETHEREXPRESS PRO/100
- DFI R120
- 2200BG
- 80302
- 253666-024US
- Itanium 2 Processor
- CELERON PCI-6886
- 8XC251SP
- DG41MJ
- I945P
- iEi Motherboard A300
- 80219
- GA-8N775
- UPI-L42
- GA-4MXSV
- 10 Gigabit AF DA Dual Port Server Adapte
- 82555
- LGA775
- D425KT
- SE75xx
- Centrino Pro
- 8VM533M-RZ
- SE7320SP2
- IRP-TR-03-10
- GA-945PL-S3P
- LAN+Modem56 PC Card PRO/100
- KEMX-2030
- GA-8I915PL-G
- IMB200VG
- SBC-776
- GA-G31M-S2C
- 915GME
- GA-8IPE1000
- Core 2 Duo
- MB820
- I815E
- SERVER BOARD SDS2
- MB884
- D845GRG
- GA-8I915P
- Scenic Edition X101
- SG-80
- D815EEA2
- AIMB-253
- AR-B1760
- 8S648-RZ
- D955XCS
- I925XE
- IM-Q35 Series
- 3U Compact PCI
- Industrial ATX Motherboard AIMB-742
- SBC-370
- 1300
- DQ57TM
- D975XBX
- DH55HC
- SOM-4486
- SHG2
- GA-8I915MK-GV
- FS-979
- SCB2
- 8S661FXM-RZ
- 386
- GD82559ER
- FB24624100
- D845PESV
- D865PCD
- Vig390s
- GA-945P-DS3/S3
- MB875
- IQ80333
- 460GX
- GA-8I915G-ZFD
- 10 Gigabit AT Ethernet Server Adapter
- 440GX
- MB935
- AN430TX
- 430TX
- ECB-862
- AXXRAKSAS2
- 3945ABG
- IXF1104
- GA-8I945GZME-RH
- LV-671
- WiFi Link 5100
- D945GCLF
- GA-N650SLI-DS4
- EMX-965GME
- GA-G1975X
- STRONGARM SA-1100
- D945GCLF2
- Core i5-10400 2.9 GHz Six-Core LGA 1200 Processor