Jensen HD5212 - Manual (Page 19)

15
HD5212
CD Player Operation
CDP mode can only be accessed when a disc is inserted. If a disc is
already in place, press the SRC button (2) to access CDP mode and begin
playback automatically.
Insert CD
Press the open button (9)
and allow the front panel to
fold down to display the
disc slot. With the label
surface facing up, fully
insert a compact disc into
the slot until the
mechanism engages and
pulls the disc in. After
inserting a disc, lift the front
panel up to return it to the
closed position and begin
playing the disc.
Eject CD
To eject a disc, first press
the open button (9) and
allow the front panel to fold down to display the disc slot (24).
Press the eject button (25) located to the right of the disc slot to eject the
disc. If the disc is not removed from the unit within 15 seconds, the disc will
be reloaded to prevent accidental damage.
NOTE: The unit is designed for play of standard 5” (12 cm.) compact
discs only. Do not attempt to use 3” (8 cm.) CD singles in this unit,
either with or without an adaptor, as damage to the player and/or the
disc may occur. Such damage will not be covered by the warranty on
this product.
Pause
Press the 1/>/|| button (13) to suspend disc play. Press the play/pause
button again to resume disc play.
Track Select
Press the TUNE/CH >> (10) or TUNE/CH << (11) button for less than one
second to advance to the next track on the CD. The selected track number
will appear on the display. Press and hold the TUNE/CH >> (10) or TUNE/
CH << (11) button for more than one second to fast forward or fast reverse
through the disc. CD play starts when the button is released.
Intro Scan (SCN)
During disc play, press 2/SCN (14) to play the first 10 seconds of each track
on the disc. When the desired track is reached, press 2/SCN again to end
the scan and play the selected track.
Repeat (RPT)
Press 3/RPT (15) during disc play to continuously repeat the track. Press 3/
RPT again to stop repeating.
Random (SHF)
Press 4/SHF (16) during disc play to play all tracks on a CD in random,
shuffled order. Press 4/SHF again to stop random play.
Display ID3 Tag Information
Press the DISP button (7) to display any text encoded on the CD (song title,
artist, etc.).
CD Player Error Codes
If a problem should develop while operating the CD player, an error code
(Error 1, Error 2, etc.) may appear on the display panel. This can indicate a
number of problems with the unit, including a mechanical error or an error in
the microprocessor control of the player. If an error code should appear, try
25
24
9
PRESS
RPT
SHF
SCN
1
2
3
4
5
6
SEL
CAT/DIR
AUX IN
MONO
DISP EQ
BAND
SRC
TUNE/CH
MUTE
A~Z
0~9
PS
ENTER
IPOD
FILE/FOLDER
HD5212
SA T RE AD Y
PRESS
RPT SHF SCN 1 2 3 4 5 6
SEL
CAT/DIR AUX IN
MONO DISP EQ
BAND
SRC
TUNE/CH
MUTE
A~Z
0~9
PS
ENTER
IPOD
FILE/FOLDER HD5212 SAT
READY
1 2 4 7
10
11
3
5 6 8 9 20
12
19 21
13 14 16 15 17 18 22