JAI VIS-CAM System TS-1327EN - Manual (Page 80)

VIS-CAM System
68 Appendix B: J-Panel Functional & Connector Description
6.2.5 Typical Wiring diagram
Figure 66. Ethernet wiring diagram.
6.2.6 Indicators
There are two LED indicators mounted by the connector:
Table 19 LED indicators
LED label LED color Indication
Trig-0 Green Indicates generation of trigger pulse to camera
Off No trigger pulse
LC DATA LED not mounted
Power Green 24V present at connector pin 10
red No 24V at connector pin 10
6.2.7 Switches
There are two switches located at the connector:
Table 20 Switch labels
Switch label Switch color Function
S4 TRIG CAM-0 Push bottom Generates a trigger pulse to the camera
S3 TRIG POLARITY Slide Selects trigger polarity