JVC LYT0633-001A - Manual (Page 57)

EN
57
SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION
6. The focus does not adjust
automatically.
7. The cassette will not load
properly.
8. In the 5-Second mode,
recording ends before
5 seconds have elapsed.
9. Snapshot mode cannot be
used.
10. The colour of Snapshot
looks strange.
11. The image taken using
Snapshot is too dark.
12. Digital Zoom does not
work.
13. Programme AE with
special effects and Fade/
Wipe Effects do not work.
14. The Black & White Fader
does not work.
6. •Focus is set to the Manual
mode.
•The recording was done in a
dark place, or the contrast
was low.
•The lens is dirty or covered
with condensation.
7. •The cassette is in the wrong
position.
•The battery’s charge is low.
8. •The 5-Second mode is set to
“ANIM.” in the Menu
Screen.
9. •The Squeeze mode is
selected.
10. •The light source or the
subject does not include
white. Or there are various
different light sources
behind the subject.
•The Sepia or Monotone
mode is activated.
11. •Shooting was performed
under backlit conditions.
12. •10X optical zoom is
selected.
•“P.AE/EFFECT” is set to
“VIDEO ECHO” in the
Menu Screen.
•“WIDE MODE” is set to
“PS- WIDE” in the Menu
Screen.
•Picture Wipe or Dissolve are
being used in a scene
transition.
13. •The Operation Switch is set
to “ ”.
14. •The Sepia or Monotone
mode is activated.
6. •Set Focus to the Auto mode
(
੬
pg. 19).
•Clean the lens and check
the focus again (
੬
pg. 55).
7. •Set it in the right position
(
੬
pg. 10).
•Install a fully charged
battery (
੬
pg. 6, 7).
8. •Select “5S” in the Menu
Screen (
੬
pg. 27).
9. •Disengage the Squeeze
mode (
੬
pg. 24).
10. •Find a white subject and
compose your shot so that it
also appears in the frame
(
੬
pg. 16).
•Turn off Sepia and Mono-
tone (
੬
pg. 30).
11. •Press the BACKLIGHT
Button (
੬
pg. 32).
12. •Set “ZOOM” to “40X” or
“200X” in the Menu Screen
(
੬
pg. 23).
•Disengage the “VIDEO
ECHO” mode (
੬
pg. 17,
31).
•Disengage the “PS-WIDE”
mode (
੬
pg. 24).
•Wait until the Picture Wipe
or Dissolve effects are
completed (
੬
pg. 17, 28).
13. •Set the Operation Switch to
“ ” (
੬
pg. 28, 30).
14. •Turn off Sepia and Mono-
tone (
੬
pg. 28, 30).
CONTINUED ON NEXT PAGE