System connections, Connection to a personal computer, A] using usb cable – JVC GR-DV600 EN User Manual
Page 62: B] using dv cable
![background image](/manuals/133581/62/background.png)
62
EN
Master Page: Left-Heading0
SYSTEM CONNECTIONS
[A] Using USB cable
It is possible to do the following things:
● Transfer still images stored on a memory card to a
PC.
● Transfer still/moving images recorded on a tape to
a PC.
● Capture still/moving images in real-time.
● Use this camcorder as a WebCam. (੬ pg. 63)
[B] Using DV cable
It is also possible to transfer still/moving images to a
PC with a DV connector by using the provided
software, software equipped with the PC or
commercially available software.
NOTES:
● Refer to “SOFTWARE INSTALLATION AND USB
CONNECTION GUIDE” for the installation of the
bundled software and drivers.
● The software operation manual is provided as PDF
file on the CD-ROM.
● It is recommended to use the AC Adapter as the
power supply instead of the battery pack.
(
● Never connect the USB cable and the DV cable
simultaneously to the camcorder. Connect only
the cable you wish to use to the camcorder.
● When using a DV cable, be sure to use the
optional JVC VC-VDV206U or VC-VDV204U DV
cable depending on the type of DV connector (4
or 6 pins) on the PC.
● If the PC connected to the camcorder via the USB
cable is not powered, the camcorder does not
enter the USB mode.
● The date/time information cannot be captured into
the PC.
● Refer to the instruction manuals of the PC and
Software.
● The still images can also be transferred to a PC
with a DV connector-equipped capture board.
● The system may not work properly depending on
the PC or capture board you are using.
Connection To A Personal Computer
[A] Using USB cable
To USB
PC
PC with DV
connector
USB cable (provided)
To DV IN/OUT (GR-DV700/500) or
DV OUT (GR-DV600/400)
[B] Using DV cable
To USB connector
To DV
connector
Core filter
Core filter
DV cable
(optional)
OR
“USB MODE” and/or “ACCESSING FILES”
appears on the LCD monitor while the PC is
accessing data in the camcorder or the camcorder
is transferring a file to the PC.
NEVER disconnect the USB cable while
“ACCESSING FILES” is displayed on the LCD
monitor since this can result in product damage.
GR-DV700PAL.book Page 62 Friday, February 21, 2003 4:04 PM
- GR-DVL300
- GR-DX27
- GR-DX95
- GR-DVP7
- GR-D21
- GZ-MG330
- GR-PD1
- GR-DVX10
- GR-DVL9700
- GR-DV3
- GR-D290
- GR-DV900
- GR-DV4000
- GR-DVL9200
- GR-DVL160
- GR-DF470
- Biphonic LYT1393
- SR-VS30E
- SR-VS30E
- GR-D340EK
- GR-D390EK
- GR-D246
- GR-X5U
- GR-D225
- EVERIO GZ-HM690U/GZ-HM670U
- COMPACT VHS GR-AXM40
- Everio GZ-HD500
- U-E
- 0503-FO-ID-VP
- D-9
- ENLYT1127-001A
- Everio GZ-HD30
- 1208YDR-YG-MD
- WR-DVXU
- EVERIO GZ-HM690U
- Everio 0110ASR-SW-VMC0S4
- 0898AYV*UN*AP
- 1000MKV*UN*VP
- AA-V40EG
- EVERIO GZ-HM860U
- YU30052-625-1
- 0797TOV*UN*SN
- Compact VHS
- Digital Media Camera LYT1366-001B
- 0597TOV*UN*SN
- DVL820
- CB-A270
- Everio GZ-HD7
- 0397TOV*UN*YP
- Everio GZ-HM340U
- VU-V856KIT
- VU-V856KIT
- VU-V856KIT
- DCR-HC40
- 1105ASR-NF-VM
- COMPACT VHS CAMCORDER GR-AXM30
- 0398AYV*UN*SW
- DY-70E
- CB-V91U
- Everio GZ-MG130U
- COMPACT GR-SXM735
- Everio GZ-HM50U
- Everio GZ-HD320
- Everio GZ-HD5
- YU30052-572
- Everio GZ-HM320U
- 1204YDR-NF-VM
- Everio GZ-HM30U
- DV 3-CCD GY-DV5000U
- 0104-FO-ID-PJ
- 0797TOV*UN*VP
- Everio GZ-MG335
- Everio GZ-HM340
- Everio GZ-HM400
- 0899FOV*UN*AP
- Everio GZ-MC100
- Everio GZ-HD3
- 0997TOV*UN*SN
- Everio GZ-HD10
- Everio GZ-HM300
- WR-MG250
- WR-MG250
- WR-MG250
- Everio GZ-MG36E/EK
- DY-70U
- CB-A260
- Everio GZ-HD620
- Everio GZ-MG37E
- YU30052-513-2
- Camcorder
- Everio GZ-HM1
- Everio GZ-HD40
- Everio GZ-HD6
- Everio GZ-MG465
- WR-MG270
- WR-MG270
- WR-MG270
- CB-V240U
- WR-DV1U
- 0206ASR-NF-VM
- CU-V550U
- 1001MKV*UN*SN
- Everio GZ-HM300U
- 8000 SERIES 42PFL8803D
- BN V856
- 0597TOV*UN*VP
- GR-D270 EN
- GR-D270EN
- GR-D230 EN
- GR-D60 EN
- GR-DX300 EN
- GR-DV700 EN
- GR-D220 EN
- GZ-MC200 EN
- GC-WP10
- GZ-EX515
- GZ-MS90
- GR-D824
- GY-HC900STU 2/3" HD Connected Cam Studio Camcorder (Body Only)