JVC GR-DV600 EN - Manual (Page 9)

EN
9
Master Page: Right-start
A
U
TO
MA
TIC DEMONSTRA
TION
Automatic Demonstration takes place when “DEMO
MODE” is set to “ON” (factory-preset).
Ⅲ Automatic Demonstration starts when there is no
operation for about 3 minutes after the Power
Switch is set to “A” or “M” and no cassette is in
the camcorder.
Ⅲ Performing any operation during the
demonstration stops the demonstration
temporarily. If no operation is performed for more
than 3 minute after that, the demonstration will
resume.
Ⅲ “DEMO MODE” remains “ON” even if the
camcorder power is turned off.
To cancel Automatic Demonstration
1
Set the Power Switch to “M” while pressing down
the Lock Button located on the switch.
2
Open the LCD monitor fully, or pull out the
viewfinder fully.
3
Press the MENU Wheel in. The Menu Screen
appears.
4
Rotate the MENU Wheel to select “s”, and
press it. The SYSTEM Menu appears.
5
Rotate the MENU Wheel to select “DEMO
MODE”, and press it. The Sub Menu appears.
6
Rotate the MENU Wheel to select “OFF”, and
press it.
7
Rotate the MENU Wheel to select “BRETURN”,
and press it twice. The normal screen appears.
NOTE:
Detach the lens cap to see the actual changes of the
Automatic Demonstration activated on the LCD
monitor or viewfinder.
Automatic Demonstration
ST M SY E
DE M – MO DE O
N O
OFF
Power Switch
Lock Button
MENU Wheel
Sub Menu
GR-DV700PAL.book Page 9 Friday, February 21, 2003 4:04 PM