John Deere PC20864 - Manual (Page 17)

Installation Instructions
OUO6050,0000A55 –19–31MAY07–3/6
PC8774
–UN–14OCT05
2- and 4- pin Connectors
A—2-pin Connector
B—4-pin Connector
3. Locate and disconnect GreenStar wiring harness 2-
and 4-pin connectors.
NOTE: Connectors may be difficult to locate as they are
often deep down in the console.
OUO6050,0000A55 –19–31MAY07–4/6
PC8775
–UN–14OCT05
4. Connect AutoTrac Universal harness to 2- and 4-pin
connectors as shown.
IMPORTANT: Be sure to make all 4 connections as
shown in photo at right.
OUO6050,0000A55 –19–31MAY07–5/6
PC8732
–UN–30AUG05
NOTE: See machine’s Technical Manual for removing
and installing bottom console wrap.
For ease of routing remove fuse panel cover.
5. Route ATU harness between console and window
towards floor behind fuse panel.
6. Pull back floor mat and continue to route ATU harness
to steering motor connector.
PC20864 (05JUL07)
15
Installation Instructions
070507
PN=17
Continued on next page