John Deere PC20864 - Manual (Page 7)

Installation Instructions
OUO6050,0000A4F –19–31MAY07–2/3
PC8750
–UN–19OCT05
A—U-bolt, Saddle, Spacer, B—Anti-Rotation Rod C—Screws E—Screw
Pillow-Block and Nuts Assembly D—Cover
(1) Clamp and Rod Anti-Rotational Device
IMPORTANT: To allow steering wheel to telescope
normally, install assembly (A) near
top end of steering column as
shown in diagram.
1. Attach U-bolt, saddle, spacer, pillow-block and nuts
(A) near top of steering shaft base.
2. Attach anti-rotation rod assembly (B) to bottom of
steering unit base plate with screws (C).
3. Attach cover (D) to steering unit assembly with
screw (E).
4. Attach steering unit to vehicle steering shaft by
inserting rod (B) into pillow-block assembly and
pressing ball plunger on rod to allow it to pass
through.
Continued on next page
PC20864 (05JUL07)
5
Installation Instructions
070507
PN=7