Sanyo CHX06052 - Manual (Page 43)

2-25
Remote Control Functions
3. Timer Remote Controller (RCS-TM80BG)
2
4. In the (program step 3) setting, set the program
pattern.
There are 4 program patterns.
Pressing
/ repeats the following display patterns.
pattern 1
The indoor unit starts operation at the programmed
time.
pattern 2
The indoor unit stops operation at the programmed
time.
pattern 3
The indoor unit starts operation at the programmed
time and changes the temperature settings.
Press / to change the temperature setting.
pattern 4
The indoor unit changes the temperature setting at
the programmed time.
Press / to change the temperature setting.
pattern 1
pattern 2
pattern 3
pattern 4
Select the program pattern and press . The program timer setting is confirmed and the unit enters the confirmation mode .
Note
If you press during the setting, it returns to the program confirmation mode.
If there is no operation made for 3 minutes during the setting, it returns to the normal mode.
In this case, all the settings in progress will be invalid.
MiniECO-i.indb 25 2007/06/20 16:28:40