8 diagnosing link quality, Diagnosing link quality, Ldjqrvlqj /lqn 4xdolw – Siemens CP 1515 User Manual
Page 126
(OLPLQDWLQJ 5HGXQGDQW 7UDIILF
126
Industrial Ethernet Wireless LAN RLM Manager, CP 1515 Manager
C79000-G8976-C171-01
•
The retransmissions will also degrade the performance as perceived by
the end-user of a wireless stations: e.g. saving a file will take longer if
many retransmissions are required.
A poor link quality can be caused by one or more of the following problems:
•
The station is almost out of range of the Access Point RLM.
•
There is a source of interference in the signal path between the station
and the Radio Link Module.
•
A station may be “hidden” from another station within the same
coverage area (for more information on hidden stations, see the section
RTS/CTS Medium Reservation (page 131)
'LDJQRVLQJ /LQN 4XDOLW\
The occurrence of a poor link quality on the wireless network can be
diagnosed in different ways.
•
You can use the RLM Manager tool to diagnose the quality of radio
communications on-site as described in
, or
•
Use the RLM Manager tool to investigate from your current location
whether a specific remote area is suffering from poor radio performance.
The RLM Manager provides the following options to diagnose radio link
quality:
—
The remote link test
—
The IEEE information
—
The Remote Statistics tab