Siemens CP 1515 - Manual (Page 194)

$GYDQFHG 3DUDPHWHUV
194 Industrial Ethernet Wireless LAN RLM Manager, CP 1515 Manager
C79000-G8976-C171-01
To enable Interference Robustness click the
$GYDQFHG
button on the
:LUHOHVV ,QWHUIDFHV
tab in the edit mode to display the Advanced Setup
window, then select the option
,QWHUIHUHQFH 5REXVWQHVV
.
 'LVWDQFH %HWZHHQ $3V
In networking environments where you have either data intensive users, or a
large number of users in a small area, you may wish to consider increasing
the number of Access Point RLMs (making the distance between Radio Link
Modules smaller), and then adjusting the Distance Between APs parameter
to optimize the load balance of the number of wireless stations per Access
Point RLM.
To change the Distance Between APs parameter display the
:LUHOHVV Ã
,QWHUIDFHV
tab in the edit mode and click the à $GYDQFHG
button. In the field
'LVWDQFH %HWZHHQ $3V
choose one of the three density options:
• Large - (default)
• Medium
• Small
The default setting
/DUJH
provides a maximum wireless coverage with a
minimum number of Access Point RLMs. This option which is typically used
for single-cell networks, but will also provide an efficient and cost effective
solution for most networks that include multiple wireless cells.