Snell Acoustics AMC 6030 User Manual

Amc 6030, Amc series

Advertising
background image

AMC 6030

AN IN-CEILING VERSION OF SNELL’S MOST SUCCESSFUL LCR
To achieve the performance capabilities of a freestanding monitor, the flush-mount
design used in the AMC 6030 overcomes three major factors that limited in-ceiling
speaker performance. First, to insure predictable response, regardless of placement
or construction type, the dual 5 1/4-inch woofers and low resonance tweeter are
placed inside a sealed, aluminum enclosure, which defines bass response, just like a
conventional loudspeaker’s enclosure, and reduces sound transfer through the ceil-
ing cavity to other rooms. Second, specific materials are used to control resonance.
The drivers are mounted to a well-braced and damped aluminum baffle, to enhance
bass/midrange clarity and deaden wall resonance. The baffle is then welded to the
well-damped, heavy gauge aluminum enclosure. Third, since flush mount speakers
fail to produce a proper soundstage, the driver plane steers energy from above the
ceiling line toward the listening area, at a 45-degree angle. The adjacent surfaces
are lined with sound deadening materials to prevent cabinet reflections from caus-
ing distortion. The result is open and clear sound that appears to be coming from
the front instead of overhead. These attributes combine for a music or theater
experience unheard of from an in-ceiling speaker. Designed by Snell’s chief engineer
Joe D’Appolito, the AMC 6030 shares drivers and crossover from Snell’s in-room
LCR7, in-wall AMC 830 and in-cabinet ICS 1030, re-engineered for the boundary
and placement of a ceiling mount enclosure. The benefit is a quartet of models that
can be mixed and matched to deliver the best music and theater experience possible
while blending in to any décor or room condition.

AMC Series

AMC 6030

Design

Infinite Baffle, Back-Boxed, In-Cieling LCR

Frequency Response

70Hz-20kHz+3dB

Sensitivity

89dB

Nominal Impedance

4 Ohms

Crossover Frequency

2kHz

Recommended Amplifier Power

50-250 Watts

Maximum Output (per pair)

110dB

Placement

2" x 10" Joist Ceiling

Drive Units

Tweeter: 1-inch SEAS Silk Dome

Woofer: Two 5.25-inch Poly, 5mm Excursion

Input Connection

Spring Loaded, Push Post, Accepts 12 Gauge Wire

Dimensions Finish:

Height: 15.6-inches

Width: 15.6-inches

Depth: 8.25-inches

Rough Opening:

Height: 14.38-inches

Width: 14.38-inches

Mounting System

8 "dog-Leg" clamps

Finishes Cabinet:

White

Grille:

White, Perforated Metal 53% Open

Manufactured by

Snell Acoustics, PO 3717, Peabody MA 01960

www.snellacoustics.com 978-538-6262 978-538-6266fax

Advertising