Snell Acoustics ICS 1070 User Manual
Ics series, Ics 1070
FOR BUILT-IN CABINETS, A UTILITY VERSION
OF THE ACCLAIMED D7 TOWER
The unique cabinet design, placement switch and wide
dispersion tweeter of the ICS 1070 bring the performance
of a freestanding high-end tower to an in-cabinet book-
shelf enclosure. Conventional bookshelf loudspeakers
sound “chesty” and image poorly when used in in-cabinet
applications. The ICS 1070 is a 6.5-inch, D’Appolito Array,
designed by Snell chief engineer, Joe D’Appolito, to fit into
furniture and millwork, and, is tuned to compensate for
the sonic problems that these cabinet boundaries cause.
The twin 6.5-inch long throw woofers provide extended
bass and plenty of output, while the 1-inch low-resonance,
silk dome tweeter enables a large sweet spot for better
stereo imaging. The ICS 1070 uses the same components as
the Snell D7 Tower and AMC 870 in-wall monitor, mounted
in a robust, texture-painted enclosure. This high output
LCR can be used for Left, Center and Right or mixed and
matched with these two siblings to provide clean, im-
pactful sound with an effortless and “airy” soundstage…
perfect for music and movies.
ICS Series
ICS 1070
ICS 1070
Design
Acoustic Suspension D'Appolito Array
Frequency Response
62Hz-22kHz+3dB
Sensitivity
90dB
Nominal Impedance
4 Ohms
Crossover Frequency
2.0kHz
Recommended Amplifier Power
50-300 Watts
Maximum Output (per pair)
110dB
Placement
Wall, or Shelf
Dispersion Angle (+1dB of on-axis response)
Horizontal: +45 degrees
Vertical:
+12 degrees
Drive Units
Tweeter: 1-inch SEAS Silk Dome
Woofer: Two 6.5-inch Poly, 5mm Excursion
Video Shielding
Standard
Dimensions
Height: 19.5-inches
Width: 7.75-inches
Depth: 11-inches
Finishes Cabinet:
Textured Black Paint
Grille:
Black Cloth over MDF Frame
Munufactured by
Snell Acoustics, PO 3717, Peabody MA 01960
www.snellacoustics.com 978-538-6262 978-538-6266fax