Schumacher PI-400 - Manual (Page 4)

Incorrect operation of your inverter may result in
damage and personal injury. Electrical current on a
110-volt circuit can be very dangerous.
Your inverter features include:
A. ON/OFF Rocker Switch
B. LED Indicator Light. (Green = Power ON,
Red = Overload)
C. Two Standard Electrical 110V AC Outlets
D. 12-Volt Power Cord
E. High-Speed Cooling Fan
F. (2) 25-Amp Fuses
How To Connect your PI-400 Inverter
Make sure the ON/OFF rocker switch is in the OFF (0)
position. (If connecting in a vehicle, remove the ciga-
rette lighter from its outlet.) Push the 12-volt power plug
firmly into the outlet. Switch the inverter rocker switch to
the ON (I) position. The LED indicator light should glow
GREEN verifying the inverter is receiving power. Turn
the inverter rocker switch to the OFF (0) position. (The
GREEN LED power indicator light may flash briefly and/
or the internal speaker may make a brief "beep." This is
normal). Make sure that the appliance to be operated is
turned OFF. Plug the appliance into one of the two AC
outlets. Turn the inverter rocker switch to the ON (I) posi-
tion. Turn the appliance on.
Attention: The internal speaker may also make a brief
"beep" when the inverter is being connected to or discon-
nected from the 12-volt power source.
-3-