Sony NVX-P1 - Manual (Page 18)

18
System settings
— Preferences
The various settings related to the system and the
memory are configurable.
After pressing
, select “Preferences” c the
items below using </M/,/m and (OK), then
press “Save” to complete (if selectable). Press
to cycle through the displays if needed.
Routing
Language
Maps
Safety Alerts
My Data
More Preferences
*1 Select “Set default” to restore the default settings.
*2 You can install custom POIs on the unit using the
NVX-P1 Desktop (page 19).
*3 When GPS signal has been lost.
Route Type* 1
To set the preference of route type to either
quickest or shortest when calculating a route.
Preference for motorways* 1
To set the preference for using motorways when
calculating a route.
Preference for urban roads* 1
To set the preference for using urban roads when
calculating a route.
Road use
To avoid toll roads, unsealed roads or ferries.
Warn when route includes,
To warn you when the route includes toll roads,
unsealed roads or ferries.
Route Demonstrator (page 17)
Language
To select the desired language for the on-screen
display, the voice guidance and voice scheme.
Voice guidance instructions
To activate/deactivate the voice guidance.
Display
To adjust the settings on display, such as auto
zoom, map colour scheme, map colours, etc.;
activate/deactivate the Next Turn/Next 4 Turns
display.
Internal Memory
To activate maps.
Points of Interest
To show/hide a POI type icon(s) on the map
displays and POI type(s) in the category list.
Active POI
To have audio/visual warning when custom
POIs*
2 are within a selected radius of your
location, which are not necessarily on your route.
Safety
To have audio warning when travelling at or
above designated speed; visual warning when
main menu is accessed in a moving car; audio/
visual warnings when the GPS signal is lost.
My POI
To display the custom POI files* 2 list and
activate/deactivate them.
Clear Data
To delete all data of recently searched
destinations, Favourites, Avoid Areas.
GPS status
To display the GPS status with the latitude,
longitude, north-pointing compass, the heading
in degrees and the strength of each satellite with
a bar chart.
Measurements
To change the setting of position format; set the
local time offset using UTC (Universal Time -
also known as Greenwich Mean Time)*
3 ; select
12/24-hour clock indication; select distance units
from kilometers/miles.
Startup
To select whether to show the tutorial/language
selection display when turning on the unit; show
the tutorial displays.
About
To display the unit information, such as version,
etc.