Advanced features of nvx-p1 desktop, Additional information, Precautions – Sony NVX-P1 User Manual
Page 21: Maintenance, Precautions maintenance, 21 advanced features of nvx-p1 desktop
21
Advanced features of NVX-P1
Desktop
The following items are available on the NVX-
P1 Desktop.
* Visible only if the map has no colour or crosshatch
texture.
Additional information
Precautions
If your car has been parked in direct sunlight,
allow the unit to cool off before operating it.
Moisture condensation
On a rainy day or in a very damp area, moisture
condensation may occur inside the unit. Should
this occur, the unit will not operate properly. In
such a case, wait for about an hour until the
moisture has evaporated.
To maintain the performance
Be careful not to splash juice or other soft drinks
onto the unit.
Maintenance
Replacing the lithium battery of the
card remote commander
Under normal conditions, the battery will last
approximately 1 year. (The service life may be
shorter, depending on the conditions of use.)
When the battery becomes weak, the range of the
card remote commander becomes shorter.
Replace the battery with a new CR2025 lithium
battery. Use of any other battery may present a
risk of fire or explosion.
City/town search
You can display the centre of a selected city/town
in the map display.
Select “Map” menu
c “Find City” c enter the
city/town name
c double click the city/town
name in the list.
Map colour and texture adjustment
You can adjust the settings of map colours, map
border colour, map border width, crosshatch
texture. You can also set to show the globe
texture*.
Select “Desktop tab”
c “Settings” c “Colours”
c “Desktop Colours.”
Map layers
You can install map layers on the unit. The
selectable layers are POIs, bodies of water and
parks, and land contours (topography).
Select “Desktop tab”
c “Settings” c “Layers.”
Backups
You can back up the preference settings, the data
of Favourites and “My Home” on the unit.
Select “File” menu
c “Backup” c “New
Backup”
c “OK.”
To delete, select “File” menu
c “Backup” c the
unwanted backup
c “Delete” c “OK.”
To restore, select “File” menu
c “Restore” c the
desired backup
c “OK.”
continue to next page
t
+ side up
x