Sharp KB-4425J - Manual (Page 33)

33
HOW TO SET BROIL
Leave the door open to the broil stop position. Place the food on the broiler grid in
the broiler pan.
Follow suggested rack positions in the Broiling Chart on page 34. Preheating is
suggested for rare steaks. To preheat, touch Broil and wait 2 to 3 minutes before
putting broiler pan with food into the oven.
TO BROIL
1 Touch Broil pad. 2 Select the desired setting. 3 Touch START.
Use the table on page 34 for approximate broiling times. Increase or decrease broiling times or move the broiling pan to a
different rack position to achieve desired doneness.
High broil is used for most broiling. Use Medium or Low broil to cook foods such as thick cuts of meat thoroughly without
excessive browning.
Broil will automatically turn off after 5 hours if it is accidentally left on. This feature can be cancelled. See 12 Hour Shut Down
on page 41.
TO CHANGE BROIL SETTING DURING USE:
You can change the Broil setting by touching the Temp pad that appears on the touchscreen. Keep touching the Temp pad until
you see the setting you want in the lower left-hand corner of the touchscreen.
• Suppose you want to change broil from High to Medium.
1 Follow To Broil steps 1-3 above. In step 2, select High.
4 Touch Temp pad. The lower left display will show
Medium Broil.
OVEN COOKING