Sharp SGH-I600 - Manual (Page 29)

SAMSUNG Proprietary-Contents may change without notice
Exploded View/Disassembly&Assembly Instructions
5-8
This Document can not be used without Samsung's authorization
1) Notice that KEY connector, INTENNA cable, and
LCD connector should not enter through PBA and
shield-can.
1) Notice that components around the connector
should not be in damage.
2) Press connector so that is sonant 'Exactly'
vertically.
1) Put deeply KEY connector so that reach to white
line.
2) Insulation tape covers whole so that connector
may not come out.
1
1) Connect the 1.3M and VGA CAMERA
to connector on the PBA.
2
1) Put PBA for shield-can.
3
4
1) Connect the KEY F-PCB and attach the
insulation tape on the connector.
1) Attach the LCD connector and the
INTENNA connector.
― Assembly