Sharp SGH-I600 User Manual
Page 30
SAMSUNG Proprietary-Contents may change without notice
Exploded View/Disassembly&Assembly Instructions
5-9
This Document can not be used without Samsung's authorization
1) Press WHEEL KEY connector so that is sonant
'Exactly' vertically.
2) Notice that components around the screw should
not be in damage.
※ WHEEL, PBA screw spec. : M1.4, L3
1) Notice that components around the screw should
not be in damage.
※ 1.3M CAMERA BRACKET screw spec. : M1.4, L4
1) Observe as KEY tension can grow worse in case
of escapes and attaches groove.
1) Check the RECEIVER and KEY PAD setting.
1) Attach the VOLUME KEY and POWER
KEY F-PCB in accordance with the groove.
8
6
5
7
2) Screw six points in the WHEEL KEY
and the PBA.
1) Connect the WHEEL KEY to the
connector on the PBA.
1) Assemble the 1.3M CAMERA BRACKET.
2) Screw two points in the CAMERA
BRACKET.
1) Check the Front Case and the PBA set.