Sony PCWA-A320 - Manual (Page 15)

14
3 Click Access Point Setup Page.
The Access Point Setup Page appears.
If the Access Point Setup Page does not appear, check whether a
proxy server is specified in the Web browser settings. If a proxy server
is specified, the Access Point Setup Page cannot be displayed. Set the
browser’s proxy settings so that the IP address of the Access Point bypasses
the proxy server. Refer to your Troubleshooting Guide - Case 3 or refer
to the Access Point Setup Utility Help for details about bypassing the
proxy server.
4 Click Easy Setup.
The Easy Setup window appears.
5 Enter the network name (SSID).
The network name (SSID) is an ID that serves to identify the wireless
network. Enter up to 32 letters, numbers or symbols.
It is recommended that you write down the network name for
future reference.
6 Set Encryption (WEP) to Enable.
Encryption (WEP) encodes wireless communication sessions and prevents
unauthorised access to the network.
7 Select Key Length.
The encryption key is the password required for WEP communications on
the encrypted network.
8 If you select 40-bit for the Key Length, enter the encryption key and re-
enter it again at WEP Key (confirmation).
Enter up to five letters, numbers and symbols. If you select 104-bit
(WEP 128-bit)
for the Key Length, enter up to 13 letters, numbers
and symbols.
It is recommended that you write down the encryption key for
future reference.
9 Click Next.
The setup confirmation window appears.
10 Click the Execute Setup button if you are satisfied with the
displayed settings.
Click the Back button to modify the settings. You will then return to
the previous page.
11 If you are satisfied with the displayed settings, close the Web browser.
●
While changing the wireless settings, the connection to the Access Point is disabled.
After completing Procedure 5, read Procedure 6 and reestablish the connection.