Sony PCWA-A320 - Manual (Page 8)

7
Power Unit
Factory default settings
The factory default settings of the Access Point are:
10 100-240 V AC jack Connect the supplied power cord here.
11 WIRELESS UNIT
connector
Connect the Wireless Unit cable here.
12 NETWORK connector Connect the Wireless Unit to your computer or other device using
an Ethernet cable.
Use a straight-through or crossover Ethernet cable.
NAME DEFAULT SETTING
Network Name (SSID) The six characters printed on the label under
the rear cover of the Access Point
(Wireless Unit)
Encryption (WEP) Disabled
Frequency (Channel) Auto Select
Broadcast Network Name (SSID) Yes
Access Control Accept all
Connection Method Obtain an IP address automatically (DHCP)
DNS server -
Speed Auto-Detect
Quick Setup Switch Enable
Time Server (NTP Server) -