Savin 4045e - Manual (Page 29)

Basic Procedure
17
2
Job Preset
You can set up the next copy content
during copying.
If a long copy job is in progress and
you do not want to wait for it to fin-
ish, you can use this function to set up
the next copy job in advance. When
the current copy job is finished, the
next job will start automatically.
A
Press [ Next Job ] when " Copying " is
shown.
B
Set up the next copy job.
C
Place the originals in the ADF,
and then press the {Start} key.
All originals are scanned.
D
Press [ To "Printing" ] .
Returns to the initial copy display.
After the current copy job, the next
job starts automatically.
Note
r You can switch the display to
the current copy job by pressing
[ To "Printing" ] . You can switch
the display to the preset job by
pressing
[ To "Reserving" ] .