Savin 4045e - Manual (Page 68)

Copying
56
2
v Centre/Border
This mode erases both the centre
and edge margins of the original
image.
Reference
The erase width is set to 10 mm
(0.4”) as a default. You can
change this setting with User
Tools.
p.96 “Erase Centre Width”
p.96 “Erase Border Width”
Note
r The relationship between the orig-
inal orientation and the erased part
is as follows:
1: Erased part
2: 2–99 mm (0.1”–3.9”)
Border Erase
A
Press [ Edit/Stamp ] .
B
Press [ Erase ] .
C
Set the erase border width.
Selecting [ Same Width ]
A Press [ Same Width ] .
B Set an erase border width with
[ n ] and [ o ] .
Note
r To change the value entered,
press [ n ] and [ o ] to set the
new value.
C Press [ OK ] .
L original K original
GCCENT3E