Sharp MX-3100N - Manual (Page 673)

7-27
SYSTEM SETTINGS
Contents
When User Authentication is Enabled
When " User Authentication Setting " (page 7-45) is enabled, follow the procedure below to log in.
When user authentication is by login name and password (and e-mail
address)
When auto login is enabled, the login screen will not appear.
Administrator login is performed in the user selection screen. For more information on the login procedure when user
authentication is enabled, see "
USER AUTHENTICATION " (page 1-17) in "1. BEFORE USING THE MACHINE".
1
Touch the [Admin Login] key.
2
Log in.
(1) Touch the [Password] key.
Enter the administrator password in the administrator
password entry screen.
(2) Touch the [OK] key.
• If login name / password / e-mail address is selected for the authentication method, the [E-mail Address] key will
appear below the "User Name".
• For the factory default administrator password, see "TO THE ADMINISTRATOR OF THE MACHINE" in the Safety
Guide.
• This completes the administrator login procedure. The system settings (administrator) can be used.
1
2
Device Account Mode User Selection Back
12 18 6
Direct Entry
Group
ABC
Admin Login
1
2
Name 1 Name 2
Name 3 Name 4
Name 5 Name 6
Name 7 Name 8
Name 9 Name 10
Name 11 Name 12
All EFGH ABCD IJKL MNOP QRSTU VWXYZ etc.
User Authentication OK
Login Name
Login Locally
User Name Administrator
Password
Auth to:
(2) (1)