SMC Networks TigerSwitch 100 - Manual (Page 191)

S
YSTEM
M
ANAGEMENT
C
OMMANDS
3-47
Example
Related Commands
show startup-config (3-44)
show system
Use this command to display system information.
Default Setting
None
Command Mode
Normal Exec, Privileged Exec
• For a description of the items shown by this command, refer to
“Displaying System Information” on page 2-8
• The POST results should all display “PASS.” If any POST test
indicates “FAIL,” contact your distributor for assistance.
Console#show running-config
building running-config, please wait.....
!
!
snmp-server community private rw
snmp-server community public ro
.
.
.
.
.
ip http port
interface vlan 1
ip address 10.1.0.1 255.255.255.0
!
no bridge 1 spanning-tree
!
line console
!
line vty
!
end
Console#