Sony BRC-Z700 - Manual (Page 35)

Ad
jus
ting an
d
S
e
tti
ng Wit
h
Men
u
s
PAN TILT ZOOM Menu
35
PAN TILT ZOOM Menu
The PAN TILT ZOOM menu is used to select the pan/
tilt/zoom mode.
PAN-TILT LIMIT
When you set PAN to ON, you can select the limit of pan
operation with the LEFT and RIGHT setting items.
When you set TILT to ON, you can select the limit of tilt
operation with the UP and DOWN setting items.
You can select the following values:
PAN LEFT: END, 169° to –169°, selectable with an
interval of 1°
PAN RIGHT: END, –169° to 169°, selectable with an
interval of 1°
TILT DOWN: END, –29° to 89°, selectable with an
interval of 1°
TILT UP: END, 89° to –29°, selectable with an interval
of 1°
Setting range of PAN LEFT/PAN RIGHT
Setting range of TILT DOWN/TILT UP
Notes
• Before storing the camera position in the preset
memory, perform the PAN-TILT LIMIT setting. If the
camera position is not within the range of the PAN-
TILT LIMIT setting, you cannot store the camera
position in the preset memory.
• The PAN-TILT LIMIT setting is reset to the factory
setting when you change IMG-FLIP of the SYSTEM
menu.
RAMP CURVE
Select the panning and tilting speed acceleration or
reduction mode when the preset panning and tilting
operation is recalled.
MODE1: Panning/tilting speed accelerates or reduces
most sharply.
MODE2: Panning/tilting speed accelerates or reduces
moderately.
MODE3: Panning/tilting speed accelerates or reduces
most gently.
D-ZOOM (digital zoom)
When you select digital zoom magnification (4Ч, 2Ч or
1.5×), the selected electronic zoom operates after the
optical zoom (20×). You can zoom up to 80× at
maximum.
When this item is set to OFF, the digital zoom function
is disabled.
<PAN TILT ZOOM>
PAN-TILT LIMIT
> PAN
LEFT
RIGHT
TILT
DOWN
UP
RAMP CURVE
D-ZOOM
OFF
END
END
OFF
END
END
MODE1
x4.0
169° –169°
CENTER (±0°)
END
(–170°) END
(170°)
END (90°)
±0°
–29°
89°
END (–30°)