Sun Microsystems Sun Fire X4200 - Manual (Page 78)

7-2 Sun Fire X4100 and Sun Fire X4200 Servers System Management Guide • December 2005
Note – Note - For your ILOM Service Processor, the default user name is root, and
the default password is changeme.
For example:
$ ssh [email protected]
[email protected]'s password:
Sun (TM) Integrated Lights Out Manager
Version 1.0
Copyright 2005 Sun Microsystems, Inc. All rights reserved.
Warning: password is set to factory default.
->
To log in from the serial port:
1. Configure your terminal device or the terminal emulation software running on a
laptop or PC to the following settings:
■ 8N1: eight data bits, no parity, one stop bit
■ 9600 baud
■ Disabled software flow control (CTS/RTS)
2. Connect a serial cable from the RJ-45 Serial Mgt port on your ILOM Service
Processor to a terminal device.
3. Press ENTER on the terminal device to establish a connection between that
terminal device and the ILOM Service Processor.
You should see the following prompt:
SUNSP0003BA84D777 login:
4. Log in to the service processor and type the default user name, root, with the
default password, changeme.
Note – Once you have logged in to the service processor as root, change the default
password for increased security.