Stinger JPEG 2000 - Manual (Page 11)

Operation
OPERATION
4-1. System Log-In
4-1.1. To enter into the setup menu, press the [MENU] button.
4-1.2. Enter password with camera number buttons from 1 to
10 on the DVRX keyboard. (Maximum of 8 digits are
available)
4-1.3. After entering the password, press the [ENTER] button.
Administrator :
If the password entered matches previously set password, “LOGIN ADMIN” message appears and you can enter
into SYSTEM SETUP. If the password entered does not match previously set password, the DVRX unit goes back
to live display mode.
Factory default password is blank. For log-in, just press [MENU] button and then [ENTER] button.
Factory default password
ADMIN : (Blank)
MANAGER : ‘ 1 ’
USER 1~USER8 : ‘ 2 ’ ~ ’ 9 ’
We recommend configuring a unique password as per the procedure in
SYSTEM MENU - CONFIGURATION - PASSWORD SETUP.
For security reasons, be sure to make note of your own password.
4-2. Factory Default
Before first operation, you must set FACTORY DEFAULT, set Time/Date, and then clear HDD, even though it is a
brand new HDD this time-synchronises the motherboard of the DVR and the HDD together as a pair. Starting
recording without FACTORY DEFAULT setting and HDD clear will cause future image-search malfunctions.
1. FACTORY DEFAULT 2. HDD CLEAR
DISPLAY SETUP
CONFIGURATION
RECORD SETUP
BACK-UP
EXTERNAL DEVICE
FACTORY DEFAULT
LANGUAGE
DISPLAY SETUP
CONFIGURATION
RECORD SETUP
BACK-UP
EXTERNAL DEVICE
FACTORY DEFAULT
LANGUAGE
HDD MANAGEMENT
TIME/DATE SETUP
CAMERA SETUP
INVERVAL SETUP
ALARM SETUP
BUZZER SETUP
PASSWORD SETUP
SYSTEM INFORMATION