Kawasaki STX-15F - Manual (Page 316)

13-10 HULL/ENGINE HOOD
Fittings
Mirror Stay Installation
•
Be sure the dampers [A] are in position (both sides).
•
The right plate [A] on the inside of the hull has a R mark
[B] and the left plate [C] has L mark [D].
•
Apply a non-permanent locking agent to the mirror stay
bolts and tighten them securely.
•
Install the damper [A] onto the hull.
NOTE
○
Apply a little oil to the damper to make installation easy.
•
Install the flushing fitting [A] into the damper [B].