Kodak DCS 700 - Manual (Page 217)

13-2
Accessing Serial Port Options
Setting the Baud Rate
Before transmitting data between the camera and a connected device, you must set the
correct baud rate required by the device. Choose from 300, 600, 1200, 2400, 4800, 9600,
19200, 38400, 57600, and 115200.
1 Highlight the Menu icon and
choose Main Menu from the
dropdown menu.
2 Choose Serial Port from the
Main menu.
3 Select one of the following from
the Serial Port menu:
✔ Baud Rate (page 13-2)
✔ Serial In (page 13-3)
✔ Serial Out (page 13-5)
1 Select Baud Rate from the Serial
Port menu.
2 Select the appropriate baud rate
for the connected device from
the Baud Rate menu.
The setting is retained until you
change it, or modem is selected
as the Serial In or Serial Out
mode. When Modem is selected,
baud rate is automatically set to
19200.