Kodak DCS 700 - Manual (Page 224)

14-3
14
C
a
me
ra
Car
e
IR Filter or Anti-aliasing Filter
Your camera contains an IR filter. You can, if you wish, purchase an anti-aliasing filter to
use instead. It may be necessary to remove the IR or anti-aliasing filter for cleaning.
Although not essential, you can wear lint-free, static-free gloves, available from your
camera dealer.
☛
The IR or anti-aliasing filter can accommodate a fair amount of dust before cleaning
is necessary. It should be cleaned less often than the imager to avoid damage.
Removing, Cleaning, and Installing the IR or Anti-aliasing Filter
1 Turn the camera off.
2 Remove the lens from the
camera.
3 Carefully unscrew the two
screws at the sides of the filter
bracket using a jewelers
screwdriver (Phillips #00).
CAUTION:
Be very careful when
removing the filter, as it is a
fragile device.
CAUTION:
Be careful that the screws do
not fall into the camera as they
can cause damage.