Kodak RP 30 - Manual (Page 224)

Operator’s Guide
Cleaning the Paper
Cleaning / Replacing the Air Filters
NOTE: The filter with holder is mounted on the fan that is next to the densitometer.
Access after opening the flap on the paper outlet.
1. Remove the front cover of the paper outlet (1): Loosen the screw (2).
1
2
2. Remove the holder (1) from the fan housing.
3. Wash the filter mat if it is not very dirty.
4. Replace very dirty air filters.
5. Put the filter in the holder and insert the holder again.
8-32 KODAK PROFESSIONAL RP 30 Laser Printer