Lucent Technologies Voice Terminal 8411 - Manual (Page 36)

33
To leave a message without
ringing an extension 1 If you are using an 8411 with a display, press and then
press the softkey below LWC
(while on-hook or off-hook)
If your 8411 does not have a display or if LWC is not
available on your display, press
(while on-hook or off-hook)
or Dial Leave Word Calling access code __________
(while on-hook or off-hook)
[dial tone]
2 Dial extension [confirmation tone]
•
Message light goes on at called voice terminal
(if so equipped)
3 Hang up or press
Menu
LWC
Drop
To cancel a Leave Word
Calling message
Note: You cannot cancel a
message left for an AUDIX
subscriber.
1 If you are using an 8411 with a display, press and then
press the softkey below CnLWC
(while on-hook or off-hook)
If your 8411 does not have a display or if CnLWC is not
available on your display, press
(while on-hook
or off-hook)
or Dial Leave Word Calling cancel code __________ (while
on-hook or off-hook)
[dial tone]
2 Dial extension [confirmation tone]
Note: If reorder tone is heard, message is not canceled; try
again.
Message
To retrieve a message when
your Message light is on 1 If your set has a display, see the Message Retrieval procedures
under the Display Features Procedures heading. Otherwise,
see your system manager for instructions regarding your local
message retrieval procedures
Menu
Cancel LWC
✔