Lanier LD 035 - Manual (Page 29)

Placing Originals
14
1
AAAA
Press [Special Original].
BBBB
Press [Mixed Size], and then press
[OK]
.
CCCC
Align the rear and left edges of
the originals as shown.
1. Place into the ADF
2. Vertical size
DDDD
Adjust the guide to the widest
original size.
EEEE
Place the aligned originals face
up into the ADF.
FFFF
Press the {{{{Start}}}} key.
Placing custom size originals
When placing custom size originals in
the ADF, specify the size of the origi-
nals.
Note
❒ Paper that has a vertical length of
128–297 mm (5"–11") and a hori-
zontal length of 128–1,260 mm (5"–
49") can be placed with this func-
tion.
AAAA
Press [Special Original].
BBBB
Press [Custm Size Origi.].
CCCC
Enter the horizontal size of the
original with the number keys,
and then press [#].
Note
❒ If you make a mistake, press
[Clear] or the
{{{{Clear/Stop}}}} key,
and then enter the value again.
DDDD
Enter the vertical size of the origi-
nal with the number keys, and
then press [#].
EEEE
Press [OK].
B4 A3 1
2
CP19AE
AdonisC3_GBcopyF_FM1.book Page 14 Thursday, November 28, 2002 1:53 PM