Lanier LD 035 - Manual (Page 40)

Copier Functions
25
2
- - - -Rotated copy
If the orientation in which your original is placed (
L or K) is different from that
of the paper you are copying onto, this function rotates the original image by 90
°
to fit it on the copy paper. This function works when Auto Paper Select or Auto
Reduce/Enlarge is selected. See p.23 “Auto Paper Select”.
Note
❒ The default for Auto Tray Switching is With image rotation, You cannot use
the Rotated Copy function if this setting is changed to Without image rotation
or Off. See p.90 “Auto Tray Switching”.
❒ You cannot use the Rotated Copy function when enlarging onto A3, B4 JIS or
11" Ч 17", 8 1 /
2
" Ч 14" size paper. In this case, place your original in the L ori-
entation.
❒ You cannot use the Rotated Copy function when” Left 2" or "Top 2” is select-
ed for stapling or if the Punch function is selected when using the 2 Tray fin-
isher. See p.35 “Staple” and p.41 “Punch”.
❒ You cannot use the Rotate Copy function if ”Left 2”, “Top 2”or “Saddle
Stitch”is selected for the stapling when using the booklet finisher.
Original size and
orientation Copy paper size and
orientation
You cannot
rotate: A4, B5
JIS, or
A5
K When enlarg-
ing to
→
B4 JIS,
A3
However,
you can use: A4, B5
JIS, or
A5
L When enlarg-
ing to
→
B4 JIS,
A3
R
R
GCROTA1E
R
GCROTA2E
R
GCROTA3E
R
GCROTA4E
R
AdonisC3_GBcopyF_FM1.book Page 25 Thursday, November 28, 2002 1:53 PM