Land Pride RCP2660 User Manual
Page 3
1
Important Safety Information
1/11/13
RCP2660, RCPM2660, RCP3060 and RCPM3060 Parallel Arm Rotary Cutter 316-111M
Important Safety Information
▲
These are common practices that may or may not be applicable to the products described in
this manual.
Safety at All Times
Thoroughly read and understand
the instructions given in this
manual before operation. Refer to
the “Safety Label” section, read all
instructions noted on them.
Do not allow anyone to operate this
equipment who has not fully read
and comprehended this manual
and who has not been properly
trained in the safe operation of the
equipment.
▲
Operator should be familiar with all
functions of the unit.
▲
Operate implement from the
driver’s seat only.
▲
The operator must not use drugs
or alcohol as they can change the
alertness or coordination of that
person while operating equipment.
The operator should, if taking over-
the-counter drugs, seek medical
advice on whether he or she can
safely operate the equipment.
▲
Make sure all guards and shields
are in place and secured before
operating implement.
▲
Do not leave tractor or implement
unattended with engine running.
▲
Dismounting from a moving tractor
could cause serious injury or
death.
▲
Do not allow anyone to stand
between tractor and implement
while backing up to implement.
▲
Keep hands, feet, and clothing
away from power-driven parts.
▲
Wear snug fitting clothing to avoid
entanglement with moving parts.
▲
Watch out for wires, trees, etc.,
when raising implement. Make
sure all persons are clear of
working area.
▲
Turning tractor too tight may cause
implement to ride up on wheels.
This could result in injury or
equipment damage.
▲
Do not carry passengers on
implement at any time.
Look For The Safety Alert Symbol
The SAFETY ALERT SYMBOL indicates there is a
potential hazard to personal safety involved and extra
safety precaution must be taken. When you see this
symbol, be alert and carefully read the message that
follows it. In addition to design and configuration of
equipment, hazard control, and accident prevention
are dependent upon the awareness, concern,
prudence, and proper training of personnel involved
in the operation, transport, maintenance, and storage
of equipment.
!
Be Aware of
Signal Words
A Signal word designates a degree or
level of hazard seriousness. The
signal words are:
Indicates an imminently hazardous
situation which, if not avoided, will
result in death or serious injury. This
signal word is limited to the most
extreme situations, typically for
machine components that, for
functional purposes, cannot be
guarded.
!
DANGER
Indicates a potentially hazardous
situation which, if not avoided, could
result in death or serious injury, and
includes hazards that are exposed
when guards are removed. It may also
be used to alert against unsafe
practices.
Indicates a potentially hazardous
situation which, if not avoided, may
result in minor or moderate injury. It
may also be used to alert against
unsafe practices.
!
WARNING
!
CAUTION
For Your Protection
▲
Thoroughly read and understand
the “Safety Label” section, read all
instructions noted on them.
Shutdown and Storage
▲
Lower machine to ground, put
tractor in park, turn off engine, and
remove the key.
▲
Detach and store implements in an
area where children normally do
not play. Secure implement by
using blocks and supports.
OFF
REMO
VE
Parts Manual QR Locator
The QR (Quick Reference) code on the front
cover and to the left will take you to the
Parts Manual for this equipment. Download
the appropriate App on your smart phone,
open the App, point your phone on the QR
code and take a picture.
Dealer QR Locator
The QR code on the left will
link you to available dealers
for Land Pride products.
Refer to Parts Manual
QR Locator on this page for
detailed instructions.