Land Pride RCP2660 - Manual (Page 43)

41
Section 6: Hydraulic Plumbing
1/11/13 RCP2660, RCPM2660, RCP3060 and RCPM3060 Parallel Arm Rotary Cutter 316-111M
Table of Contents
Deck Motor Plumbing
Refer to Figure 6-9:
The hydraulic motor on the deck is powered by a tractor
driven PTO motor pump receiving fluid from a 35 gallon
reservoir.
If cutter blades stall, an overpressure relief valve opens
to provide a return path to the reservoir. A “Deck Motor”
push button on the control stick is provided to allow the
operator to turn the motor on an off form the tractor seat.
Return oil is filter of particulates before dumping back
into the reservoir. Case drain is not filtered. Make certain
the hydraulic reservoir is full of oil and that the shut-off
valve is fully open before engaging tractor PTO.
Deck Motor Plumbing for Independent Control Option
Figure 6-9
27966
Deck Motor
Shut Off
Valve
Filte
Pressure
Return Line
Case Drain
Relief
Valve
Deck Motor
Switch
35 Gallon
Reservoir
Motor Pump
See Figure 6-7
See Figure 6-