Lincoln Impinger Conveyor Ovens 1633-000-EA User Manual
Page 17
Low Profile –1600 Series Advantage Digital Service Manual -–Int’l
17
OVEN CONTROL – REPLACEMENT
A.
Shut off power at main breaker.
B.
Remove control box cover and front panel.
C.
Remove all wiring connections and mark for reassembly.
D.
Remove oven control by pulling control from mounting pins. Remove control from oven.
E.
Before installing new control, set voltage jumper (located at the bottom center of the oven control) to
the proper (120/240V) position. Install the four push button extensions (included with the oven
control) by pushing the extensions onto the four set buttons on control.
F.
Reassemble in reverse order and check system operation.
G. Set the oven control for the proper operating mode. The 1600 series ovens have dual burner
systems. The oven control must be set to the “Dual oven mode”. Set control as follows: With the
oven power switch “off”, depress the “temp” and “down” buttons and turn the oven “on”. Control will
indicate “Low Pro”. Release the buttons, the control will indicate “Temp to store”. Press the “temp”
button. The control is now set for dual burner operation.