Paxar 9474 - Manual (Page 78)

5. Type the word length you need and press e . You’ll see
Enter Stop Bits [1-2]: 1
6. Type the stop bits you need and press e . You’ll see
Enter Start (XON) character:
17
7. Enter a number from 1-127 for XON flow control, or 128 for
DTR flow control. You’ll see
Enter Stop (XOFF) character:
19
8. Type a number from 1-127 for XOFF flow control, or 128 for
DTR flow control and press e . You’ll see the
Configuration Options menu.
◆ If you use DTR control (128) as the XON character, you
must also use DTR as the XOFF character. If you do not
select DTR as the XOFF character, XON changes back to
the default character (17).
◆ The Start and Stop characters must be set for DTR flow
control for IBM PC equipment.
Press 1 to exit to the main menu.
C l e a r i n g B a t c h M e m o r y a t P o w e r - u p
Use this function to clear batch memory automatically each time
the printer is turned on.
If you enable this function, any batches
waiting to print when the printer is turned off
will be lost.
Setting Printer Options 5-33