Paxar Gold 6037EX - Manual (Page 185)

Using UServe and UClient 7-5
Following is the sequence of commands you would use to copy these files
and create this directory structure on the printer.
NOTE: This command sequence assumes it starts in the c:\ root
directory on both the printer and PC.
1. ucd d: Change the printer’s directory from c:\ to d:\.
2. lcd app Change the PC’s directory to c:\app.
3. put *.* Copy all of the files from c:\app (on the PC) to d:\ on
the printer.
U C l i e n t C o m m a n d s
Following are the UClient commands.
Command Description
close Closes the communication connection between the PC
and printer by taking the PC out of a ready state.
get Copies a file from the printer to the PC.
help Displays a list of available commands or help information
about a specific command.
lcd Changes the directory on the PC.
ldel Deletes a file on the PC.
ldir Lists details about files and/or directories on the PC, as
specified.
lmd Creates a directory on the PC.
lrd Deletes a directory on the PC.
lwd Displays the path to the current directory on the PC.
open Puts the PC in a communications ready state.
ping Confirms that the open PC/printer connection is valid.
put Copies a file from the PC to the printer.
putbios Copies a BIOS binary file from the PC to the printer.
puttrueffs Copies a TrueFFS binary file from the PC to the printer.
quit Exits UClient.
reboot Restarts the printer.