Philips DVDR610 - Manual (Page 41)

41
English
3139 246 13454
Introduction
Use 'Timer Recording’ to automatically
start and stop a recording at a later date/
time. The DVD recorder will tune to the
right programme number and begin
recording at the specified time.
With this DVD recorder, you can pre-
programme up to six recordings within
a period of 15 days.
To make a programmed recording,
your DVD recorder needs to know:
– The date you want to make the
recording.
– The programme number of the TV
channel.
– The start and stop time of the recording.
– The recording mode (M1/M2/M2x/M3/
M4/M6/M8), see page 37.
About 'VPS/PDC’
'VPS' (Video Programming System)/'PDC'
(Programme Delivery Control) are used
to control the start and duration of TV
channel recordings. If a TV programme
starts earlier or ends later than was
scheduled, the DVD recorder will then
turn on and off at the correct time.
If you want to program a time that is
different from the VPS/PDC time, you
must turn off VPS/PDC.
Programming recordings
1
Turn on the TV power. Select the correct
Video In channel at the TV.
2
Press TIMER on the remote control.
➜
The timer overview appears.
●
If the time has not set yet, the { Time
and Date } menu will appear on the
screen, see page 27.
3
Press the matching colour coded button
on the remote control to select { New
Timer }.
➜
The timer entry screen appears.
TIMER MENU 11.55
Start time 11:56
Stop time 12:26
Date 26:06:2004
Preset 19 BBC24
Repeat Once
M1
VPS/PDC Off
Clear all Store Cancel
{ } Change start time
Record Mode
4
Press 3 4 to select an entry in the menu
and press 2 to confirm.
5
Press 3 4 to select an option or make an
entry (character/number).
➜
Press 1 2 to move to the previous or
next entry field if necessary.
{ Start time }
– Enter the start recording time and
press OK to confirm.
{ Stop time }
– Enter the stop recording time and
press OK to confirm.
{ Date }
– Enter the date for recording (Day/
Month/Year) and press OK to confirm.
{ Preset }
– Select the preset channel and press
OK to confirm.
Timer Recording
TIPS: To play a DVD+R on other DVD players, see “Finalising disc (DVD+R)”.
During timer recording, press STANDBY-ON will stop recording.
1DVDR6xx_Eng00_13454c 9/28/04, 1:26 PM 41