Philips DVDR610 - Manual (Page 63)

63
English
3139 246 13454
Troubleshooting
(cont’d)
Recordings are not
occurring as scheduled.
New recordings cannot be
made.
The wrong TV channel was
decoded (recorded) after
you programmed a
recording using the
ShowView system.
A DVD+RW or DVD+R
recorded on this DVD
recorder will not play on a
DVD player.
– The TV channel you want to record is not stored or you selected
the wrong programme number. Check TV channels stored.
– If you adjust the clock after you set a timer recording, reset the
timer recording.
– If the DVD recorder cannot read the disc, you cannot record.
– You cannot use the DVD recorder to duplicate copyrighted
materials (DVDs or videotapes) onto a DVD+RW/+R, “COPY
PROTECT” will be displayed.
– A finalised DVD+R has been inserted. Change disc.
– ‘VPS/PDC’ is turned on but ‘VPS/PDC time’ is wrong. Enter the
exact ‘VPS/PDC time’.
1) Enter the ShowView programming number of the desired TV
channel.
2) Press OK to confirm.
3) Check the channel number in the {Ch.} input field. If this does
not correspond to the desired TV channel, select this entry
field and change the channel number.
4) Press OK to confirm.
– If a recording is too short, it is possible that a DVD player cannot
detect it. Please observe the following 'minimum recording
times'. Recording mode : {M1} – 5 minutes, {M2}– 10 minutes,
{M2x} – 13 minutes, {M3} – 15 minutes, {M4} – 20 minutes,
{M6} – 30 minutes, {M8} - 30 minutes.
– Some DVD players cannot playback DVD+RW recordings.
You can solve this problem by using a special function :
1) Press OPEN/CLOSE on the DVD recorder to open the disc
tray.
2) Insert the disc but do not close the tray.
3) Hold down the number button {2} on the remote control until
the tray closes. The disc is modified.
4) If this fails to produce the desired result, repeat the procedure
using the number button {3} on the remote control.
5) You can restore the disc to its original condition by pressing
and holding number button {1}.
Warning! There is a risk that you can no longer play the disc on
other DVD players after the following procedure. Therefore,
apply this function with particular care.
Problem Solution
1DVDR6xx_Eng00_13454c 9/28/04, 1:26 PM 63